Buttons that offer a choice of size, color, etc. show the stocks condition for top choice only! Make your choice to see if the item is in stock.


Another Weir Story rising water big mullet and shattered rod

by Dean Price Murwillumbah NSW Australia

This is another weir story I will try to make it the last one although some of the readers of this great blog site may find it interesting. I went down to the local weir and saw that the local council have put up barriers to stop the big high tides coming over the weir and infecting the local drinking/town water with salt water. This has been happening for about 18 months now. It first happened when a tide came over during a succession of king tide days. The council warned everyone not to drink the water until they managed to clear enough salt by using very large pumps to pump the salt water back over to the salt side. The salt water is heavier than the fresh so the hoses that suck out the saltwater sit on the bottom on the fresh water side of the weir. I'm not sure if this has ever occurred before as I have only lived there for 12 years but locals have never mentioned it happening before as far as I know.
Council now put barriers with sandbags up every time predicted king tides are to occur. The council have spent a huge amount of money into research on how they are to approach this problem and wrote up a report suggesting the tides will continue to be big based on scientific studies . I wont go on about rising waters but the issue for council is that years ago, council made a regulation with landowners upstream that prevents them from raising the height of the weir.

Anyway back to the fishing, with the barriers lined along the entire length of the weir the usual fresh water that continually flows into the salt was forced into one corner where there is a fish ladder which allows fish to move to either side to spawn.

On this day the water was running very hard through the fish ladder and there was this big school of sea mullet in the flow feeding on micro plant matter. They are large powerful fish that travel a long way through the ocean and continue far up the rivers. I started to cast a fly in the large school and occasionally would get a quick eat and spit out. I then realised that the school was so thick that all I had to do was let my fly sink a little and then just swiftly lift it up to jag a fish. I think I hooked 1 in the mouth and 3 in the body for an almighty fight that saw 3 bust offs and a shattered rod! It took a few seconds for the fish to register that it was in danger and boy did they go hard. The 5x line size was not really a match for these strong ocean goers. The last hook up, I really tried hard to restrict the fish from turning and the fight lasted a bit longer with the fish running frantically through the school, then again it busted off as well. The school then moved down away from me about another 15 meters. I changed my set up to a better connection knot between the casting line and tippet and made the cast into the middle of the school. I let the fly sink a little, a quick lift and bham 2 of the mid section pieces of the 53m just totally shattered.

I decided to leave the mullet alone and went home happy about getting to fight strong fish but wondering what happened with the rod. I was able to replace the parts easy as I had a broken (my fault) Daiwa 43m and lucky that the broken 43m had the parts that needed replacing on the 53m. I since realized that as I have had the 53m for such a long time and have caught many fish with it over some years for many fishing trips I believe the 2 pieces that shattered were due to the way I have been breaking the rod down. Because the 53m's thick bottom to middle pieces are quite durable I have been jolted down upon the pieces when breaking the rod down. I have been using lighter rods lately and realized that I should be firmly holding the pieces and pressing them downwards gently into the fold down positions. I think I may have weakened the fibers of the 53m by using this jolt down action. Chris what do you think?

Comments for Another Weir Story rising water big mullet and shattered rod

Click here to add your own comments

May 01, 2019
Fatigue?
by: Chris Stewart

Not sure. I have heard people speculate that after several very hard fights the rod gets stressed, but I don't know if that is true. I do know that a very sharp strain (like that from an overly aggressive hook set) can break a rod. I suspect that may be the case when yours broke, but not being there to see it there's no way for me to tell.

Collapsing the rod more gently has no downside, though, and it is a better idea than jolting them down.

May 02, 2019
Kyogi Time!
by: Les Albjerg

Dean,
It sounds like you need a Kyogi - Carp Rod! I really enjoyed your story and write-up. We have been under a week of a cold front here, and neither one of my carp spots has any cruisers in it yet. It is suppose to warm up late this week. The Kyogi rods are ready to do battle! I'm up to six species on the Kyogi now. I really hope to catch a sturgeon with it this year. My largest fish so far is a 12 pound carp. It handled it without a problem. That 0x tippet rating is hard to beat with a big fish. I fish 1x just to protect the rod.

May 06, 2019
Kyogi
by: Dean Price

Thanks Les
I have been wanting to purchase a big fish fixed line rod for some time. I will have to wait till things are a bit better cash wise. Thanks for the response, I think it would be good to be able to use a greater strength tippet.
Cheers
Dean.

Click here to add your own comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Your Tenkara Stories.


“The bitterness of poor quality remains long after the sweetness of low price is forgotten” – Benjamin Franklin

"Study to be quiet." - Izaak Walton 1653

"Be sure in casting, that your fly fall first into the water, for if the line fall first, it scares or frightens the fish..." Col. Robert Venables 1662

As age slows my pace, I will become more like the heron.


Warning:

The hooks are sharp.
The coffee's hot.
The fish are slippery when wet.

Beware of the Dogma






Currently processing orders that were received June 13.